Skip to content
The 5.4-litre Coyote-based V8 Hypercar engine catches in the dyno cell, the numbers climb, and for a few minutes, we're not in Michigan anymore. We're at Le Mans. 
Christian Hertrich Avatar
Christian Hertrich
03.08.26

A Lap of Le Mans, Without Leaving Dearborn

Every time we fire up our dyno cell in Dearborn, the room holds its breath. Then the engine catches, the numbers climb, and for a few minutes, we're not in Michigan anymore.

We're at Le Mans.

That's what you're watching in our latest film. Our 5.4-litre Coyote-based V8 Hypercar engine, running a full simulated lap of the Circuit de la Sarthe — right here on the dyno. Every gear change, every braking zone into Mulsanne, every full-throttle charge towards the Ford Chicane, all modelled in real time.

The engine doesn’t know the difference, but your ear can tell when it is at wide open throttle and rockets past 9000 rpm. That's what a world-class virtual proving ground buys you, and this engine work has been going on behind the scenes for months now.

We don't wait for the racetrack to start learning. We can't afford to.

The 5.4-litre Coyote-based V8 Hypercar engine catches in the dyno cell, the numbers climb, and for a few minutes, we're not in Michigan anymore. We're at Le Mans. 
The 5.4-litre Coyote-based V8 Hypercar engine catches in the dyno cell, the numbers climb, and for a few minutes, we're not in Michigan anymore. We're at Le Mans. 

Build the engine, interrogate it, and let the data tell us where the real work is. It's a lesson that Ford Racing has carried over from its various other motorsport programs into endurance racing.

We are also taking learnings from the first program to ever do this: our 1960s Le Mans program with the GT40. In fact, the test chamber we are using for the Hypercar sits just yards from where we did the original work on the GT40 more than 60 years ago.

What we learned then informs what we do today, and what we do today will inform the future. That is what makes this program so exciting.

However, an engine is only half the job.

That's why this film also takes you south, to our Technology Centre in North Carolina, where our Hypercar drivers are testing our buck and feeling the car before they've turned a single wheel on track.

Every detail gets refined because when our drivers reach Le Mans, there can be no surprises.

The 5.4-litre Coyote-based V8 Hypercar engine catches in the dyno cell, the numbers climb, and for a few minutes, we're not in Michigan anymore. We're at Le Mans. 

We're days from our first test in France, but every dyno session and every hour in that buck is essential for our preparation.

We intend to arrive ready. And ready we will be.

Ford Racing's Hypercar program continues development ahead of its return to the top class of the FIA World Endurance Championship in 2027.

Christian Hertrich is Powertrain Chief Engineer at Ford Racing.

What to Read Next

The IMSA AMR Rapid Response Team uses elite training and the Ford F-150 Raptor to deliver lifesaving racetrack emergency response in seconds.

The Cavalry of the Track: Trust, Grit, and the Ford F-150 Raptor

Roy Spielmann Avatar
Roy Spielmann
09.09.26
2026 Shannons Speedseries, Round 3, Queensland Raceway, Ipswich, Queensland, Australia. 14 Jun, 2026.

Why Mustang Cup Australia Is the Stepping Stone Young Drivers Need

Dick Johnson Avatar
Dick Johnson
25.08.26

Ford Racing Just Dropped the 2027 Mustang Challenge North America Schedule

Chris Ward Avatar
Chris Ward
21.08.26
The Ford V8 That Changed Formula 1

The Ford V8 That Changed Formula 1

Gemma Lusty Avatar
Gemma Lusty
21.08.26